This device is used to test the suction resistance and heating temperature of semi-finished e-cigarettes without filling CBD oil. This device simulates people smoke, with a fixed flow rate (such as 17.5ml/s). Put the e-cigarette mouthpiece in the fixture, and the suction end of the e-cigarette will generate a certain suction resistance, and the heating wire temperature will rise. The device will judge whether the suction resistance and temperature values are within the qualified range or not based on the set parameters.
Specifications:
Product dimension | Device: 350*340*330mm, pump: 200*200*150mm |
Power supply | AC220V, 50HZ |
Cooling and blowing air source | 0.3~0.6MPa |
Control system | PLC+4.3inch touch screen |
Suction mode | Vacuum pump constant suction |
Suction speed | 17.5ml/s |
Other function | Could set upper and lower limit parameters to automatically judge whether the product is qualified or not. |
Negative pressure sensor | 0~ -3000PA; 0.2％FS |
Current sensor | 0~5A; 0.2％FS |
Alarm function | If product is unqualified, system will alarm. |
