Availability: | |
---|---|
Quantity: | |
This machine is used to test the adaptability of electronic products or materials, to store and use under humid and hot environmental conditions where temperature and humidity cycles change and condensation occurs on the product surface.
Technical Parameters
External dimensions | 910 * 1050 * 1530mm (W * D * H) |
Inner dimensions | 500 * 500 * 600mm (W * D * H) |
Analytical accuracy | temperature: ± 0.01 ℃; Humidity: ± 0.1% R.H |
Temperature range | -40 ℃~150 ℃ |
Temperature fluctuation | ± 2 ℃ |
Temperature uniformity | ± 2 ℃ |
Humidity range | 20% ~ 98% R.H |
Humidity fluctuation | ± 2.0% R.H |
Humidity uniformity | ± 3% |
Heating rate | 2 ℃ -4 ℃/min (from room temperature to maximum temperature, non-linear no-load) |
Cooling rate | 0.7 ℃ -1 ℃/min (from room temperature to minimum temperature, non-linear no-load) |
Material | stainless steel |
Power supply | AC 220V, 50HZ, power: 4.5KW |
Control system | 7-inch touch screen |
Insulation layer | hard Polyurethane foam+glass wool, 100mm thick |
Lighting design | high brightness window lighting, easy to observe the test product |
content is empty!